Clearance Items

Mural Size:  18"x 24"

This mural is A Grade and has no visible defects.  It was ordered by one of our customers who later decided to go with the Textured Wall Tiles for the more uniform look.  .This mural is a natural stone product that is hand cut with irregular edges and shows the beautiful character of the stone.

Mural Size:  24" x 36"  

This mural looks very good overall.  It was used as a display mural.  It has minor chips and scratches on the following tiles:

A1	A2	A3	A4	A5	A6
B1	B2	B3	B4	B5	B6
C1	C2	C3	C4	C5	C6
D1	D2	D3	D4	D5	D6

A2 - Chip in Upper Left Corner

A4 - Chip in Lower Left Corner

B4 - Small Scratch in Lower Left Area

B6 - Chip in Lower Right Corner

C4 - Small Scratch in Lower Left Area

D4 - Chip in Lower Left Corner

Most chips and scratches would hardly be noticeable once installed.

Dura Satin

Dura Satin Finish Ceramic tile has the resilience and scratch resistance of the matte tile, but with a semi-gloss finish similar to the color reproduction and texture of the glossy tile. These tiles may be used in backsplashes, showers, or wall murals in any room in residential or commercial buildings. They are not recommended for floor, countertop, or exterior applications. You may use any commercially available adhesive for ceramic tile.  We recommend un-sanded grout.  Tiles can be cleaned with any household non-abrasive cleaner and a soft cloth or sponge.

Mural Size:  5' x 8'

This mural is in great shape and at 5' x 8', it could be used for many purposes.  The mural is made of Tempered Glass and can't be cut, so the installation will have to fit the whole mural.  In the upper right corner of the mural is the Mossy Oak Break Up Logo.  Below is a photo of the Logo.

Mural Size:  30" x 48"  

These tiles look very good overall with no visible damage.  This mural was made during color testing and is slightly less vivid than what we are currently producing.  Without comparing the tiles side by side, nobody would ever know.  This mural would make a great looking entry or could be used as border tiles.  As border tiles, it would span 20 feet.

A1	A2	A3	A4	A5	A6	A7	A8
B1	B2	B3	B4	B5	B6	B7	B8
C1	C2	C3	C4	C5	C6	C7	C8
D1	D2	D3	D4	D5	D6	D7	D8
E1	E2	E3	E4	E5	E6	E7	E8

Mural Size:  18"x 24"

This mural has minor scratches and nicks on the white backing of the tiles.  These imperfections shouldn't be noticeable once the mural is installed.  This mural was originally made while performing color testing and seemed a little dark.  Contact Us regarding any additional question about this mural.

Textured Glass Tile

These tiles meet and exceed ASTM tests set forth by ANSI standards for commercial and residential floor and wall applications. Images are applied to the backside of the glass to protect the dyes from wear and abrasion. 
We recommend using an Epoxy Thin-Set mortar in white for mounting the textured glass tile in any application. This adhesive should be readily available in most areas, and has exhibited superior bond strength without damaging the SingleStep white backing o­n the tiles.  You should use a grout specifically formulated for use with glass tile. Tiles can be cleaned with any household non-abrasive cleaner and a soft cloth or sponge.  Tempered glass tiles cannot be cut, so for applications where cutting is necessary (corners, holes, etc. in floor installations), you would order non-tempered tile.  Tempering is added to the larger tiles for strength.  The 6" x 6"  tiles met the ANSI and ASTM standards above without tempering.  The 12" x 12" tiles are offered in tempered and non-tempered.  For the 12" tile installations, you would want to use the tempered tiles except where cutting is needed.  The non-tempered tile may be cut with a glass cutter, or a tile saw (wet saw application, new diamond blade) or using a waterjet cutting service (check your local vendors).