Your Choice of Mossy Oak Patterns

(Shown in Mossy Oak Break Up)

Material:  Commercial Grade 12" x 12" Textured Glass

Mural Size:  48" x 60" (20 Tiles)

This mural consists of (20) 12" Commercial Grade Textured Glass Tiles.  It would look great as an entry, hearth or floor inlay.  This mural could also be used as a linear project covering 20 linear feet of border.  You could also break the tiles up and add them as accents throughout a large installation.  The tiles are made from tempered glass and have been tested to be 700% stronger than a standard commercial tile.  Since the tiles are tempered, heat would not be a concern but they can't be cut.  If you need to cut a tile, let us know when ordering and we will substitute the tile with a non-tempered version that visually can't be distinguished from the tempered.

Textured Glass Tile

These tiles meet and exceed ASTM tests set forth by ANSI standards for commercial and residential floor and wall applications. Images are applied to the backside of the glass to protect the dyes from wear and abrasion.  We recommend using an Epoxy Thin-Set mortar in white for mounting the textured glass tile in any application. This adhesive should be readily available in most areas, and has exhibited superior bond strength without damaging the SingleStep white backing o­n the tiles.  You should use a grout specifically formulated for use with glass tile. Tiles can be cleaned with any household non-abrasive cleaner and a soft cloth or sponge.  Tempered glass tiles cannot be cut, so for applications where cutting is necessary (corners, holes, etc. in floor installations), you would order non-tempered tile.  Tempering is added to the larger tiles for strength.  The 6" x 6"  tiles met the ANSI and ASTM standards above without tempering.  The 12" x 12" tiles are offered in tempered and non-tempered.  For the 12" tile installations, you would want to use the tempered tiles except where cutting is needed.  The non-tempered tile may be cut with a glass cutter, or a tile saw (wet saw application, new diamond blade) or using a waterjet cutting service (check your local vendors).

Your Choice of Mossy Oak Patterns

(Shown in Mossy Oak Break Up)

Material:  Commercial Grade 12" x 12" Textured Glass

Mural Size:  48" x 72" (24 Tiles)

This mural consists of (24) 12" Commercial Grade Textured Glass Tiles.  It would look great as an entry, hearth or floor inlay.  This mural could also be used as a linear project covering 24 linear feet of border.  You could also break the tiles up and add them as accents throughout a large installation.  The tiles are made from tempered glass and have been tested to be 700% stronger than a standard commercial tile.  Since the tiles are tempered, heat would not be a concern but they can't be cut.  If you need to cut a tile, let us know when ordering and we will substitute the tile with a non-tempered version that visually can't be distinguished from the tempered.

Textured Glass Tile

These tiles meet and exceed ASTM tests set forth by ANSI standards for commercial and residential floor and wall applications. Images are applied to the backside of the glass to protect the dyes from wear and abrasion.  We recommend using an Epoxy Thin-Set mortar in white for mounting the textured glass tile in any application. This adhesive should be readily available in most areas, and has exhibited superior bond strength without damaging the SingleStep white backing o­n the tiles.  You should use a grout specifically formulated for use with glass tile. Tiles can be cleaned with any household non-abrasive cleaner and a soft cloth or sponge.  Tempered glass tiles cannot be cut, so for applications where cutting is necessary (corners, holes, etc. in floor installations), you would order non-tempered tile.  Tempering is added to the larger tiles for strength.  The 6" x 6"  tiles met the ANSI and ASTM standards above without tempering.  The 12" x 12" tiles are offered in tempered and non-tempered.  For the 12" tile installations, you would want to use the tempered tiles except where cutting is needed.  The non-tempered tile may be cut with a glass cutter, or a tile saw (wet saw application, new diamond blade) or using a waterjet cutting service (check your local vendors).

Your Choice of Mossy Oak Patterns

(Shown in Mossy Oak Break Up)

Material:  Commercial Grade 12" x 12" Textured Glass

Mural Size:  60" x 72" (30 Tiles)

This mural consists of (30) 12" Commercial Grade Textured Glass Tiles.  It would look great as an entry, hearth or floor inlay.  This mural could also be used as a linear project covering 30 linear feet of border.  You could also break the tiles up and add them as accents throughout a large installation.  The tiles are made from tempered glass and have been tested to be 700% stronger than a standard commercial tile.  Since the tiles are tempered, heat would not be a concern but they can't be cut.  If you need to cut a tile, let us know when ordering and we will substitute the tile with a non-tempered version that visually can't be distinguished from the tempered.

Textured Glass Tile

These tiles meet and exceed ASTM tests set forth by ANSI standards for commercial and residential floor and wall applications. Images are applied to the backside of the glass to protect the dyes from wear and abrasion.  We recommend using an Epoxy Thin-Set mortar in white for mounting the textured glass tile in any application. This adhesive should be readily available in most areas, and has exhibited superior bond strength without damaging the SingleStep white backing o­n the tiles.  You should use a grout specifically formulated for use with glass tile. Tiles can be cleaned with any household non-abrasive cleaner and a soft cloth or sponge.  Tempered glass tiles cannot be cut, so for applications where cutting is necessary (corners, holes, etc. in floor installations), you would order non-tempered tile.  Tempering is added to the larger tiles for strength.  The 6" x 6"  tiles met the ANSI and ASTM standards above without tempering.  The 12" x 12" tiles are offered in tempered and non-tempered.  For the 12" tile installations, you would want to use the tempered tiles except where cutting is needed.  The non-tempered tile may be cut with a glass cutter, or a tile saw (wet saw application, new diamond blade) or using a waterjet cutting service (check your local vendors).

Your Choice of Mossy Oak Patterns

(Shown in Mossy Oak Break Up)

Material:  Commercial Grade 12" x 12" Textured Glass

Mural Size:  60" x 84" (35 Tiles)

This mural consists of (35) 12" Commercial Grade Textured Glass Tiles.  It would look great as an entry, hearth or floor inlay.  This mural could also be used as a linear project covering 35 linear feet of border.  You could also break the tiles up and add them as accents throughout a large installation.  The tiles are made from tempered glass and have been tested to be 700% stronger than a standard commercial tile.  Since the tiles are tempered, heat would not be a concern but they can't be cut.  If you need to cut a tile, let us know when ordering and we will substitute the tile with a non-tempered version that visually can't be distinguished from the tempered.

Textured Glass Tile

These tiles meet and exceed ASTM tests set forth by ANSI standards for commercial and residential floor and wall applications. Images are applied to the backside of the glass to protect the dyes from wear and abrasion.  We recommend using an Epoxy Thin-Set mortar in white for mounting the textured glass tile in any application. This adhesive should be readily available in most areas, and has exhibited superior bond strength without damaging the SingleStep white backing o­n the tiles.  You should use a grout specifically formulated for use with glass tile. Tiles can be cleaned with any household non-abrasive cleaner and a soft cloth or sponge.  Tempered glass tiles cannot be cut, so for applications where cutting is necessary (corners, holes, etc. in floor installations), you would order non-tempered tile.  Tempering is added to the larger tiles for strength.  The 6" x 6"  tiles met the ANSI and ASTM standards above without tempering.  The 12" x 12" tiles are offered in tempered and non-tempered.  For the 12" tile installations, you would want to use the tempered tiles except where cutting is needed.  The non-tempered tile may be cut with a glass cutter, or a tile saw (wet saw application, new diamond blade) or using a waterjet cutting service (check your local vendors).

Your Choice of Mossy Oak Patterns

(Shown in Mossy Oak Break Up)

Material:  Commercial Grade 12" x 12" Textured Glass

Mural Size:  72" x 96" (48 Tiles)

This mural consists of (48) 12" Commercial Grade Textured Glass Tiles.  It would look great as an entry, hearth or floor inlay.  This mural could also be used as a linear project covering 48 linear feet of border.  You could also break the tiles up and add them as accents throughout a large installation.  The tiles are made from tempered glass and have been tested to be 700% stronger than a standard commercial tile.  Since the tiles are tempered, heat would not be a concern but they can't be cut.  If you need to cut a tile, let us know when ordering and we will substitute the tile with a non-tempered version that visually can't be distinguished from the tempered.

Textured Glass Tile

These tiles meet and exceed ASTM tests set forth by ANSI standards for commercial and residential floor and wall applications. Images are applied to the backside of the glass to protect the dyes from wear and abrasion.  We recommend using an Epoxy Thin-Set mortar in white for mounting the textured glass tile in any application. This adhesive should be readily available in most areas, and has exhibited superior bond strength without damaging the SingleStep white backing o­n the tiles.  You should use a grout specifically formulated for use with glass tile. Tiles can be cleaned with any household non-abrasive cleaner and a soft cloth or sponge.  Tempered glass tiles cannot be cut, so for applications where cutting is necessary (corners, holes, etc. in floor installations), you would order non-tempered tile.  Tempering is added to the larger tiles for strength.  The 6" x 6"  tiles met the ANSI and ASTM standards above without tempering.  The 12" x 12" tiles are offered in tempered and non-tempered.  For the 12" tile installations, you would want to use the tempered tiles except where cutting is needed.  The non-tempered tile may be cut with a glass cutter, or a tile saw (wet saw application, new diamond blade) or using a waterjet cutting service (check your local vendors).